• Two three phase load break switch of the type RV44, class E3 according to IEC 62271-102, interruption in SF6.
• Vacuum circuit breaker with integrated protection relay
• Door interlock
• Low voltage compartment
• LS-compartiment
• Capacitive voltage presence indicator sockets with possibility of phase comparison
• Integrated SV-25 Arc-Killer
• Gas exhaust duct on the rear side of the cubicle

• Set of auxiliary contacts on load break switch(es) 1 and/or 2
• Key lock on load break switch(es) 1 and/or 2
• Key lock on earthing switch
• Mechanical interlock between both load break switches
• No door interlock
• Motor operation on load break switch(es) 1 and/or 2: 24-48-110 V AC/DC or 220 V AC
• Earthing switch
• Earthing balls on load break switch(es) 1 and/or 2
• Earthing balls outside the cubicle
• Capacitive voltage presence indicators on load break switch 1 and/or 2
• Plinth of a height of 200 mm, 300 mm or 400 mm (other dimensions on request)
• Floor panels
• Press button control of load break switch(es) 1 and/or 2
• Remote control of load break switch(es) 1 and/or 2
• Current transformers

• Motor operation *
• Closing coil*
• Tripping coil*
• Current shunt trip *
• Current transformers
• Direct / Time delayed under voltage release *
• Set of auxiliary contacts
• Fault contact
• Supply for protection relay testing (battery bloc)
• Operation counter
• Automatic reclosing
• Push button control on the circuit breaker
• Remote control for the circuit breaker
• Key lock

* available voltages: 24 V AC/DC, 48 V AC/DC, 110 V AC/DC, 220 V AC

Requested specifications for the VA-2 circuit breaker: short time current, rated current, rated voltage, power to be protected.